54 2410 Digital Telephone User’s Guide
Headset Auto Off-Hook
The Headset Auto Off-Hook option on the Miscellaneous Options screen allows you to set the
2410 to go off-hook on the headset when you make a call from a speed dial or a Call Log entry
or using on-hook dialing. By default, the Headset Auto Off-Hook option is disabled.
Note:
Note: Keep in mind the following information:
- If you enable the Headset Auto Off-Hook option, the Speaker Auto Off-Hook option
is disabled automatically.
- If your system manager administers the Speakerphone setting to NONE for your
extension, you will be unable to make calls using on-hook dialing. However, you
can make a call from a speed dial or a Call Log entry if the Headset Auto Off-Hook
option is enabled.
To set the Headset Auto Off-Hook option
1. From the Home screen, press the Option softkey.
The Options screen appears.
2. Press the Miscellaneous feature button.
The Miscellaneous Options screen appears.
3. Press the Yes/No softkey or feature button 6 to indicate whether you want Headset Auto
Off-Hook enabled.
4. Perform one of the following steps:
● If you want to save the setting you just selected, press the Save softkey. You will hear a
confirmation tone, and you are returned to the Options screen.
● If you want to return to the Options screen without changing the setting, press the
Cancel softkey.
● If you want to return to page 1 of the Home screen without changing the setting, press
.
To Next Page
Loading...
