64 2410 Digital Telephone User’s Guide
Inspect
The Inspect feature shows you call-related information for an incoming call when you are
already active on a call.
To use the Inspect feature
1. Press the button if administered.
2. Press the call appearance button in question.
Information appears on the display screen. You remain connected to the present call.
3. To return to the held call, press and then the call appearance button of the held call.
Tones and Their Meaning
Note:
Note: The following tables describe the defaults for each ringing and feedback tone.
Check with your system manager to verify if the descriptions in the Meaning
column are accurate for your system.
Ringing Tones are produced by an incoming call.
Inspect
Ringing Tones
Rings Meaning
1 ring A call from another extension.
2 rings A call from outside or from the attendant.
3 rings A priority call from another extension or from
an Automatic Callback call you placed.
ring-ping
(half-ring)
A call redirected from your telephone to
another telephone because Send All Calls or
Call Forwarding All Calls is active.
◆
To Next Page
Loading...
