2. AVPP Installation and Configuration
3600 Series IP Phone Installation Page 33
IP Office 4.0 15-601082 Issue 05a (22nd May 2007)
Network Status
Information about the AVPP's connection to the LAN is provided through the Network Status screen.
1. From the AVPP main menu select System Status.
2. Select Network Status. A screen similar to the following is displayed:
• Ethernet Address
MAC address of the AVPP (hexadecimal).
• System Uptime
The number of days, hours and minutes since the AVPP was last reset.
• Net
The type of connection to the Ethernet switch currently being utilized.
• Data is transmitted over Avaya components by proprietary technology developed by
Avaya. The Avaya Radio Protocol (ARP) packets and bytes can be differentiated from
other types of transmissions and are used to evaluate system functioning by Avaya
customer support and engineering personnel.
• RX
Ethernet statistics concerning the received packets during System Uptime.
• bytes - bytes received.
• packets - packets received.
• errors - sum of all receive errors (long packet, short packet, CRC, overrun, alignment).
• drop - packets dropped due to insufficient memory.
• fifo - overrun occurred during reception.
• alignment - nonoctet-aligned packets (number of bits NOT divisible by eight).
• multicast - packets received with a broadcast or mulitcast destination address.
To Next Page
Loading...
