Avaya 3616 - Admin Options; Opening and Using the Admin Menu

3. Phone Configuration
3600 Series IP Phone Installation Page 45
IP Office 4.0 15-601082 Issue 05a (22nd May 2007)
Admin Options
Opening and Using the Admin Menu
The phone administration menu contains configuration options that are stored locally on each wireless
phone. These include network and wireless network settings that must be set to match the network and
wireless network.
• Note that the options available vary according to the particular model of phone.
3616, 3620 and 3626 Phones
1. With the phone powered off, simultaneously press and hold the Start Call and End Call buttons.
2. After hearing two beeps, release the Start Call button, then release the End Call button.
3. If an administration password has been set, it must be entered to display the Admin menu. If no
password is set, the Admin menu is displayed.
4. To scroll through the menu options, press Up, Down and Select.
5. To change the selected option, press OK or press Up to return to the previous menu level.
3641 and 3645 Phones
1. With the phone powered off, while pressing the START key press and release the END key.
2. When the administration menu appears release the START key.
3. If the phone's administration password has been enabled, the phone will require that password to
be entered before it displays the administration menu. The default password is 123456. This step
is not required if the administration password has not been enabled.