Avaya 4500 - Adding IPFIX Collector ERS 5000;4500

Avaya Inc. – External Distribution
19
avaya.com
4.3 Adding a Collector
To add an IPFIX collector address, enter the following command. Up to two collectors can be
added.
 ERS-Stackable(config)# ip ipfix collector <a.b.c.d> enable
The following commands are used to display the IPFIX flows.
 ERS-Stackable# show ip ipfix table sort-by ?
byte-count Byte number
dest-addr Destination address
first-pkt-time First packet time
last-pkt-time Last packet time
pkt-count Packet number
port Port number
protocol Protocol number
source-addr Source address
TCP-UDP-dest-port TCP/UDP destination port
TCP-UDP-scr-port TCP/UDP source port
TOS TOS
 ERS-Stackable# show ip ipfix table sort-by <item> sort-order
<ascending|decending> display ?
all Display all entries
top-10 Display first 10 entries
top-100 Display first 100 entries
top-200 Display first 200 entries
top-25 Display fist 25 entries
top-50 Display first 50 entries