Avaya 4601 - Chapter 3: Local Administrative Options; Introduction

Issue 3 April 2006 37
Chapter 3: Local Administrative Options
Introduction
After you have successfully installed an IP telephone, you might be instructed to administer one
of the options described in this chapter.
Note:
Note: You can modify the settings file to set parameters for IP telephones that
download their upgrade script and application files from the same TFTP or HTTP
server. See the section on “4600 Series IP Telephone Scripts and Application
Files” in Chapter 4 of the 4600 Series IP Telephone LAN Administrator Guide.
Because the 4601 IP Telephone does not have a display, it is limited in its ability
to support Local Administrative Procedures. Specifically, the only Local
Administrative Procedures the 4601 supports are:
In addition, because it lacks a display to provide visual feedback during data entry, the
4601 IP Telephone has unique data entry and feedback procedures. See Entering Data
for the 4601 IP Telephone on page 40.
● RESET (and Restart)
● SIG
● SSON
● TEST
● CHADDR (DHCP Client Hardware Address)
● ALERT
● TAG
● LOG
● AGC (for handset only)