Restart Scenarios
84 4600 Series IP Telephone Installation Guide
3. Press the * key to terminate the procedure without restarting the telephone.
Press the # key to restart the telephone.
The remainder of the procedure depends on the status of the boot and application files:
Boot File Needs to be Upgraded
Use the following procedure to upgrade the Boot file:
Note:
Note: A boot file rarely needs to be upgraded. Perform this procedure only at Avaya’s
request.
1. The following message displays:
2. While the hardware is being initialized, the following message displays:
3. While either the application file if there is one or the boot code is uncompressed into RAM,
the following message displays:
This message counts the seconds as the application file (replboot_v3.app in this example)
is being written into RAM.
If this condition applies: See:
Boot File Needs to be Upgraded
Boot File Needs to be Upgraded on
page 84.
Latest Boot File Loaded/No Application File or
Application File Needs to be Upgraded
Latest Boot File Loaded/No
Application File or Application File
Needs to be Upgraded on page 87.
Latest Boot File and System-Specific
Application File Already Loaded
Latest Boot File and System-Specific
Application File Already Loaded on
page 89.
Restarting...
Initializing
Loading: 5 secs
replboot_v3.app 4084KB
To Next Page
Loading...
