Avaya 4601 - Page 42

Local Administrative Options
42 4600 Series IP Telephone Installation Guide
DHCP chaddr field value C H A D D R (2 4 2 3 3 7) Manually Setting the
DHCP Client Hardware
Address on page 50.
Clear values to factory defaults C L E A R (2 5 3 2 7) Clear Procedure
on
page 51.
Computer-Telephony
Integration
C T I (2 8 4) Computer-Telephony
Integration (CTI) Enable/
Disable on page 52.
FKEU (XMOD) Enable/Disable F K E U (3 5 3 8 #) Enabling/Disabling the
FKEU (XMOD)
Interface on page 54
Group Identifier
(Release 2.0 and later only)
G R O U P (4 7 6 8 7) Group Identifier on
page 55.
PC Ethernet Interface I N T (4 6 8) Interface Control
on
page 56.
Event Logging L O G (5 6 4) Disable/Enable Event
Logging on page 59.
Quality of Service options Q O S (7 6 7) QoS Option Setting
on
page 60.
Reset the telephone R E S E T (7 3 7 3 8) Reset System Values on
page 62.
Restart the telephone R E S E T (7 3 7 3 8) Restart the
Telephone on page 63.
Signaling protocol identifier
(Release 2.0 and later only)
S I G (7 4 4) Signaling Protocol
Identifier on page 64.
Site-Specific Option Number S S O N (7 7 6 6) Site-Specific Option
Number Setting on
page 66.
Layer 2 frame tagging control
(4601 only)
T A G (8 2 4) Setting L2Q Tagging
Control (4601 Only) on
page 67.
Test the telephone T E S T (8 3 7 8) Self-Test Procedure
on
page 68.
Local Programming Option Code See
2 of 2