Not all SFP transceivers or products support DDM.
Job aid
The following table describes the reach provided by various SFP transceivers. This table is
informational only — not all Avaya Ethernet switching and routing products support all the SFP
transceivers listed here.
Table 1: Supported SFP transceivers
Model Description Part number Minimum software version
ERS 5900 ERS 4900
Important:
Avaya supports SFP transceivers with the following part numbers: AA1419013-E5, AA1419014-E5,
AA1419015-E5, and AA1419025-E5 to AA1419040-E5. However, Avaya strongly recommends using
the newer DDI versions of these SFP transceivers.
1000BASE-T SFP gigabit Ethernet,
RJ-45 connector
AA1419043-E6 7.0 7.1
1000BASE-SX SFP 850 nm LC
connector
AA1419013-E5**
This transceiver
has reached end-
of-sale (EOS). For
more information
about EOS
transceivers, and
recommended
replacements for
your product, see
Locating end of
sale notices on
page 11.
7.0 7.1
1000BASE-SX SFP 850 nm MT-RJ
connector
AA1419014-E5**
This transceiver
has reached end-
of-sale (EOS). For
more information
about EOS
transceivers, and
recommended
replacements for
your product, see
Locating end of
sale notices on
page 11.
7.0 7.1
1000BASE-LX SFP 1310 nm LC
connector
AA1419015-E5**
This transceiver
has reached end-
7.0 7.1
Table continues…
SFP
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 20
Comments on this document? infodev@avaya.com
To Next Page
Loading...
