Table 20: General SFP+ specifications
Parameter Specifications
Dimensions (H x W x D) 8.5 x 13.4 x 56.4 millimeters (0.33 x 0.53 x 2.22
inches), unless otherwise stated.
Connectors LC ultra physical contact (UPC)
Storage temperature –40 to 85 ºC
Operating temperature 0 to 70 ºC for RoHS -E6 models
up to 85 ºC for high temperature models
Supported SFP+ transceivers
The following section provides specifications for the supported SFP+ transceivers.
10GBASE-SR/SW SFP+ specifications
The 10GBASE-SR/SW SFP+ transceivers provides 10 GbE service at 850 nm.
For more information about the 10GBASE-SR/SW SFP+ transceiver, including test and
measurement information, see the IEEE 802.3ae standard.
Caution:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
The following table lists the specifications for the 10GBASE-SR/SW SFP+ transceivers. The part
number of this SFP+ transceiver is AA1403015-E6.
Table 21: IEEE 802.3ae 10GBASE-SR/SW SFP+ transceiver specifications
Parameter Specifications
Data rate 10 gigabits per second (Gbps)
Line rate (64B/66B code) 10.3125 Gbps ± 100 parts per million (ppm)
Center wavelength range 840 to 860 nanometers (nm), nominal 850 nm
Distance Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber: 2 to 300 m
Table continues…
SFP+
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 46
Comments on this document? infodev@avaya.com
To Next Page
Loading...
