Chapter 2: New in this document
The following sections detail what is new in Installing Transceivers and Optical Components on
Avaya Ethernet Routing Switch 4900 and 5900 Series, NN47211-302 for Release 7.1.
10GBASE-BX10
The switch platforms support 10GBASE-BX SFP+ bi-directional SFP+ Ethernet transceiver. For
more information about these transceivers, see
10GBASE-BX SFP+ specifications on page 54.
SFP and SFP+ transceiver models list
The table listing the supported SFP and SFP+ models is updated to include the product platform
and minimum software release. For more information, see
Job aid for SFP on page 20 and Job aid
for SFP+ on page 41.
Locating end of sale notices
Procedure to locate end of sale notices and replacement recommendations for transceivers and
optical components is included. For more information, see
Locating end-of-sale notices on page 11.
SFP+ transceivers
The missing transceivers are now added. For more information, see:
• Job aid for SFP+ on page 41
•
10GBASE-ER CWDM DDI SFP+ specifications on page 52
• 10GBASE-ZR CWDM DDI SFP+ specifications on page 53
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 12
Comments on this document? infodev@avaya.com
To Next Page
Loading...
