Avaya 4900 Series - Page 53

Parameter Specifications
Average launched power –0.2 dBm to 4 dBm
Extinction ratio (minimum) 8.2 dB
Tx power, OMA (minimum) +1.5 dBm
Tx power, OMA-TDP (minimum) –0.2 dBm
TDP at 800 ps dispersion (maximum) 2.8 dB
Receiver characteristics:
Wavelength (requirement) 1450 nm to 1620 nm
Receiver sensitivity (unstressed), OMA –14.1 dBm, P_OMA
IEEE 10GBASE-ER Stressed Rx Sensitivity –11.3 dBm, P_OMA
Receiver overload –1 dBm, P_avg
Receiver reflectance –26 dB
Receiver damage threshold +4 dBm
10GBASE-ZR CWDM DDI SFP+ specifications
The following table lists the part numbers for the 10GBASE-ZR CWDM DDI SFP+ transceivers with
corresponding wavelengths.
The reach for this SFP+ transceiver is up to 70 km* at a wavelength of 1551 nm.
Table 30: Part number and center wavelength assignment
Part number Center wavelength
assignment
Reach Minimum insertion loss
Tx and Rx
AA1403161-E6 1471 nm 70 km 10 dB
AA1403162-E6 1491 nm 70 km 10 dB
AA1403163-E6 1511 nm 70 km 10 dB
AA1403164-E6 1531 nm 70 km 10 dB
AA1403165-E6 1551 nm 70 km 10 dB
AA1403166-E6 1571 nm 70 km 10 dB
AA1403167-E6 1591 nm 70 km 10 dB
AA1403168-E6 1611 nm 70 km 10 dB
The following table lists the transmitter and receiver specifications for the 10GBASE-ZR CWDM DDI
SFP+ transceiver.
Table 31: 10GBASE-ZR CWDM DDI SFP+ specifications
Parameter Specifications
Transmitter characteristics
Table continues…
SFP+ specifications
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 53
Comments on this document? infodev@avaya.com