Avaya 4900 Series - Job aid

2. Determine wavelength restrictions or requirements.
3. Use the following job aid to determine the appropriate SFP+ transceiver or cable for your
application.
Job aid
SFP+ transceivers are hot-swappable input and output enhancement components that allow 10-
gigabit connections.
All Avaya SFP+ transceivers use LC connectors to provide precision keying and low interface
losses.
The following table lists and describes the Avaya SFP+ transceiver models.
Model Description Part number Minimum software version
ERS 5900 ERS 4900
10GBASE-SR/SW
SFP+
400 m, 850 nm
MMF
AA1403015-E6 7.0 7.1
10GBASE-LRM
SFP+
220 m, 1260 to
1355 nm; 1310 nm
nominal MMF
AA1403017-E6 7.0 7.1
10GBASE-LR/LW
SFP+
10 km, 1310 nm
SMF
AA1403011-E6 7.0 7.1
10GBASE-ER/EW
SFP+
40 km, 1550 nm
SMF
AA1403013-E6 7.0 7.1
10GBASE-CX SFP
+ 2-pair twinaxial
copper cable that
plugs into the SFP+
socket and
connects two 10-
gigabit ports
10 meter AA1403018-E6 7.0 7.1
10GBASE-CX SFP
+ 2-pair twinaxial
copper cable that
plugs into the SFP+
socket and
connects two 10-
gigabit ports
3 meter AA1403019-E6 7.0 7.1
10GBASE-CX SFP
+ 2-pair twinaxial
copper cable that
plugs into the SFP+
socket and
connects two 10-
gigabit ports
5 meter AA1403020-E6 7.0 7.1
Table continues…
SFP+ transceivers
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 41
Comments on this document? infodev@avaya.com