Parameter Specifications
• 4700 MHz-km fiber (OM4): 2 to 400 m
Link optical power budget 7.3 dB
Maximum transmitter and dispersion penalty 3.9 dB at 300 m
Transmitter characteristics
Root-mean-square spectral width 0.05 to 0.40 nm
Launch power –7.3 to –1.0 dBm
Minimum extinction ratio 3.0 dB
Maximum optical return loss tolerance –12 dB
Receiver characteristics
Average receive power for BER 10
-12
–9.9 to –1.0 dBm
Receiver damage threshold 0 dBm
Maximum receiver sensitivity in OMA –11.1 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –7.5 dBm
10GBASE-LRM SFP+ specifications
The 10GBASE-LRM SFP+ transceiver provides 10 GbE service at a wavelength of 1310 nm. This
SFP+ transceiver can attain a reach of up to 220 m on 62.5 μm multimode fiber.
The following table lists the transmitter and receiver specifications for the 10GBASE-LRM SFP+
transceiver. These parameters meet the IEEE 802.3aq-2006 standard. The part number of this SFP
+ transceiver is AA1403017-E6.
In this table, the OMA, average launch power, and peak power specifications apply at TP2, after
accounting for patch cord loss.
Table 22: IEEE 802.3aq 10GBASE-LRM SFP+ transceiver specifications
Parameter Specifications
Data rate 10 Gbps
Line rate (64B/66B code) 10.3125 Gbps ± 100 ppm
Center wavelength range 1260 to 1355 nm; 1310 nm nominal
Distance Up to 220 m
Link optical power budget 1.7 to 1.9 dB
Maximum transmitter waveform and dispersion
penalty (TWDP)
4.7 dB
Transmitter characteristics
Average launch power –6.5 to 0.5 dBm
Peak launch power 3 dBm
Table continues…
SFP+ specifications
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 47
Comments on this document? infodev@avaya.com
To Next Page
Loading...
