Parameter Specification
Maximum launch power –3.0 dBm
Minimum launch power –9.0 dBm
Receiver characteristics
Maximum receiver sensitivity –19.5 dBm
Maximum input power (maximum average receive
power)
–3.0 dBm
1000BASE-BX40 bidirectional SFP specifications
The 1000BASE-BX40 SFP transceivers (part numbers AA1419076-E6 and AA1419077-E6) can
attain a reach of up to 40 km. The minimum IL is 6 dB.
The following table describes standards, connectors, cabling, and distances for the 1000BASE-
BX40 SFP transceiver.
Table 18: 1000BASE-BX40 bidirectional SFP specifications
Parameter Specifications
Connectors Single-fiber LC
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Distance Up to 40 km with SMF
Wavelength 1310 nm and 1490 nm
Link optical power budget 20.0 dB
Maximum transmitter and dispersion power penalty 3.3 dB
Transmitter characteristics
Maximum launch power 3.0 dBm
Minimum launch power –3.0 dBm
Receiver characteristics
Maximum receiver sensitivity –23 dBm
Maximum input power (maximum average receive
power)
–3.0 dBm
1000BASE-EX DDI SFP specifications
The following table describes the 1000BASE-EX DDI SFP transceiver. This SFP transceiver
operates at 1550 nm and has a reach of up to 120 km. The part number is AA1419071-E6*.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 14 dB of attenuation exists
between the transmit and receive ports.
SFP
April 2016 Installing Transceivers and Optical Components on Avaya ERS 4900 and 5900
Series 38
Comments on this document? infodev@avaya.com
To Next Page
Loading...
