AVAYA DEFINITY G3 / ProLogicx Confidential
4
Add hunt-group 11 Page 2 of 6
HUNT GROUP
Message Center: none
LWC Reception: none
AUDIX Name:
Messaging Server Name:
Add hunt-group 11 Page 3 of 6
HUNT GROUP
Group Number: 11 Group Extension: 5000 Group Type: ucd
Member Range Allowed: 1 - 999 Administered Members (min/max): 1 /4
Total Administered Members: 4
GROUP MEMBER ASSIGNMENTS
Ext Name Ext Name Ext Name
1: 5001 VOICEMAIL 7: 13:
2: 5002 VOICEMAIL 8: 14:
3: 5003 VOICEMAIL 9: 15:
4: 5004 VOICEMAIL 10: 16:
5: 11: 17:
6: 12: 18:
5.4 CALL COVERAGE PATH ADMINISTRATION
A coverage path forwards calls to anther extension if the station is in use or
not answered. Placing the Intuity UCD Group number in a Coverage Path
will send busy and ring-no-answer calls to the Intuity to be answered.
Assign the Intuity ports Hunt
Group as the coverage point for
each subscriber
Enter 'ADD COVERAGE PATH n' -- n is an available coverage path
number.
• Define the coverage path as desired. For the following conditions,
specify that you want such calls to be answered by the Intuity by
entering 'y'. Usually, call coverage is programmed for both inside
and outside calls, for Busy and Don't Answer conditions.
• Active: If any call appearance is off hook, calls will forward.
Busy: If all call appearances are offhook, calls will forward.
Don't Answer: Unanswered calls forward after the specified
number of rings.
All: All calls forward immediately without ringing the subscriber's
station.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
To Next Page
Loading...
Need help?
General
