Installation and Upgrades for DEFINITY ONE and
IP600 Internet Protocol Release 10
555-233-109
Issue 6
December 2001
Hardware Additions
6-16Downloading Firmware to Port Circuit Packs
6
2. Fill in the following fields:
■ Source Board Location:
■ Firmware Image File Name:
, which is stored in the source
board filesystem
■ Target Board code:
, which must be 1 type only (for example,
TN464GP)
■ Suffix:
, which must be a programmable board with the P suffix
■ Schedule Download?
NOTE:
The default is y. The download to the specified target board
begins when the scheduled start time is reached. Once
download begins, you cannot make any changes to the
Firmware Download screen. If you set the field to n, the
Start
Date/Time: and Stop Date/time:
fields do not display.
The download begins as soon as you press
Enter.
■ Start Date/Time:
■ Stop Date/time:
An optional field that allows you to stop the
download before the time of day of the greatest usage.
NOTE:
If the scheduled stop time is reached before all boards have
been downloaded, software completes the downloading of the
board in progress before aborting the remainder of the
download schedule.
■ Remove Image File After Successful Download?
NOTE:
The default is y. At the completion of a successful download,
the software automatically removes the download file from the
source board filesystem and, if no more files remain in the
filesystem, disables the filesystem, freeing up the memory on
the source board. We recommend keeping the default setting.
NOTE:
If you set it to n, at the completion of the download, you must
manually remove the download file from the source board
filesystem.
To Next Page
Loading...
