Before you begin
Ensure to use L100 Series Headsets.
Procedure
1. Press Main Menu.
2. Scroll to Options & Settings, and press Select.
3. Scroll to Advanced Options, and press Select.
4. Scroll to Acoustic Protection..., and press Select.
5. Choose one of the following and press Select:
• Default: Sets the acoustic protection values to one of the following options that your
administrator sets:
Dynamic
8 hours
4 hours
Off
This configured value is the default setting for acoustic protection that your administrator
sets.
• Off: Sets the acoustic protection off.
• Dynamic: Sets the acoustic feature to Dynamic, which activates itself and gradually
reduces the loud volume of the phone conversations to prevent from reaching the
damaging decibel levels.
• 8 hours : Sets the acoustic protection for 8 hours.
• 4 hours: Sets the acoustic protection for 4 hours.
Related links
Acoustic Protection on page 51
Administrative messages
Your administrator can send or push important messages such as notification of an early office
shut down because of bad weather. The administrator can also send information about an
imminent service interruption to your deskphone.
These types of messages can take any of the following forms:
• A text message streaming across the top display line, that also accompanies an audible alert.
• An audible alert broadcast through the Speaker or the headset if that device is active.
• An interrupt screen notifying you that you are receiving an audio alert.
Customizing your phone
April 2022 Using Avaya J169/J179 IP Phone H.323 52
Comments on this document? infodev@avaya.com
To Next Page
Loading...
