Local Administrative Options Using the Telephone Dialpad
Issue 1 June 2010 97
Note:
Note: Press the Mute button momentarily. Do not press this button while pressing other
keys/buttons.
The following text displays left-justified at the top of the display:
2. If you do not want to clear all values, press * (no) to terminate the procedure and retain the
current values.
A screen displays the following prompt on the top line:
3. Press the * button to terminate the procedure without clearing the values. Press the # button
to clear all values to their initial default values.
A confirmation tone sounds and the following text displays left-justified at the top of the
display:
The telephone is cleared to its “out of the box” state.
Group Identifier
Use the following procedure to set or change the Group Identifier.
Note:
Note: Perform this procedure only if the LAN Administrator instructs you to do so.
For more information about groups, see The GROUP System Value
on page 70.
While the telephone is on-hook and idle, press the following sequence of keys on the faceplate
of the telephone:
Mute 4 7 6 8 7 (Mute G R O U P)
Clear all values?
*=no #=yes
Are you sure?
*=no #=yes
Clearing values.
To Next Page
Loading...
