SZ; Reviewed:
SPOC 8/10/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
17 of 30
ACM-Cisco-CM-GK.doc
4.2. Configuring Cisco CallManager
To use the Gatekeeper to control calls from the Cisco CallManager, the Cisco 2811 router must
be added on the Cisco CallManager as a Gatekeeper. Configurations are shown below.
4.2.1. Add Gatekeeper
Launch Cisco CallManager Administration Application and log in with proper user name and
password. The display below shows the gatekeeper configuration. To add a gatekeeper, follow
the following steps.
• Click Device Æ Gatekeeper
• Enter the Cisco 2811 Gatekeeper’s IP address 60.1.1.10 as Host Name/IP Address
• Enter Gatekeeper for Description (Optional)
• Leave Registration Request Time To Live and Registration Retry Timeout as default
• Check box Enable Device
• Click Update
• Click Reset Gatekeeper
To Next Page
Loading...
