SZ; Reviewed:
SPOC 8/10/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
26 of 30
ACM-Cisco-CM-GK.doc
4.2.5. Configure a Route Pattern
Extension range 45xx is assigned to users at Location A. When users dial 45xx from the
Location B, the Cisco CallManager knows how to route the calls to the Gatekeeper using the
route pattern configured below. The call setup message will be carried out via the trunk selected
in this route pattern. The display below shows the route pattern configuration utilized for these
Application Notes. Follow the following steps to add a route pattern.
• Click Route Plan Æ Route/Hunt Æ Route Pattern Æ Add a New Route Pattern
• Enter 45XX for Route Pattern
• Using drop-down menu to select North American Numbering Plan for Numbering
Plan
• Using drop-down menu to select Trunk-to-Gatekeeper for Gateway or Route List
• Select the radio button for Route this pattern
• Leave remaining parameters as default setting
• Click Update
To Next Page
Loading...
