Chapter 4: Installation preparation
Environmental requirements
Your switch requires a suitable environment.
To protect your switch and operate it safely, see the following table and list for a description
of environmental ranges and requirements.
Acceptable environmental operating ranges
Criteria Range
Temperature 0 to 50 degrees C
Humidity 0 to 95% non-condensing
Altitude -200 to 13,000 feet
Acoustic noise less than 50 dBA typical
Sound pressure level measurement
methods are based on ISO 7779.
Additional environmental requirements
•
no nearby heat sources such as hot air vents or direct sunlight
• no nearby sources of severe electromagnetic noise
• no excessive dust
• adequate power source within six feet; one circuit required for each power supply
• at least 2 inches (5.08 cm) on all sides of the switch unit for ventilation
• adequate space at the front and rear of the switch for access to cables
Related topics:
Verifying environmental suitability on page 16
Power specifications on page 16
VSP 7000 installation July 2013 15
To Next Page
Loading...
Need help?
General