Avaya VSP 7000 Series User Manual

Risk of injury from electric shock
Before working on this equipment, be aware of proper safety practices and hazards involved
with
electrical circuits. Use only power cords that have a grounding path. Ensure the switch is
properly grounded before connecting a power source.
Note:
VSP 7000 series switches do not have a power switch. When you connect the AC power
cord to a suitable AC power outlet, the switch powers up immediately. Ensure that you
connect the AC power cord to the back of the switch, and then connect the cord to a power
outlet. You must use the correct power cord for the switch and power supply.
Country and plug
description
Specifications Typical plug
Continental Europe
•
CEE7 standard VII male
plug
• Harmonized cord (HAR
marking on the outside of
the cord jacket to comply
with the CENELEC
Harmonized Document
HD-21)
220 or 230 VAC
50 Hz
Single phase
U.S./Canada/Japan
• NEMA5–15P male plug
• UL-recognized (UL
stamped on cord jacket)
• CSA-certified (CSA label
secured to the cord)
100 or 120 VAC
50/60 Hz
Single phase
United Kingdom
• BS1363 male plug with
fuse
• Harmonized cord
240 VAC
50 Hz
Single Phase
Installation preparation
22 VSP 7000 installation July 2013
Comments? infodev@avaya.com

Avaya VSP 7000 Series Specifications

General

Brand	Avaya
Model	VSP 7000 Series
Category	Switch
Language	English