Avaya VSP 7000 Series - Page 42

LED State Description
Amethyst (Solid) The fan tray in position 1/2 is back to
front airflow and is operating
normally.
Amethyst (Blinking) The fan tray in position 1/2 is back to
front airflow and has degraded.
Check
for a fan failure and replace if
necessary.
Amethyst / Ruby
(Alternating)
The fan tray in position 1/2 does not
match the front to back airflow mode
of the power supply. You must
replace the fan tray with a front to
back airflow model.
Sapphire / Ruby
(Alternating)
The fan tray in position 1/2 does not
match
the back to front airflow mode
of the power supply. You must
replace the fan tray with a back to
front airflow model.
Sapphire (Blink x3) /
Ruby (Solid)
The fan tray in position 1/2 has
degraded and does not match the
front to back airflow mode of the
power
supply. You must replace the
fan tray with a front to back airflow
model.
Amethyst (Blink x3) /
Ruby (Solid)
The fan tray in position 1/2 has
degraded and does not match the
back to front airflow mode of the
power supply. You must replace the
fan tray with a back to front airflow
model.
Switch installation
42 VSP 7000 installation July 2013
Comments? infodev@avaya.com