29
Sleep Position
When the camera idles for certain period, it will enter sleep mode and go to the sleep position. Please
set up sleep timer to enable sleep mode.
Select Setting > Camera > Sleep Position > Factory Downside Position or Preset 9.
Sleep Timer
Set the camera idle time to enter sleep mode. When entering sleep mode, the camera will turn to sleep
position.
Select Setting > Camera > Sleep Timer > Off, 10 sec, 5 min, 10 min or 20 min.
Please notice that whenever there is USB streaming or RTSP/RTMP streaming, the camera won’t enter
sleep mode.
On Screen Menu
Enable/disable on screen display status information.
Select Setting > Camera > On Screen Menu > Off, On, or Load Preset Off.
[Note] Under Off mode, Load Preset, Save Preset and AI icons will not be displayed on the screen.
Under Load Preset Off mode, only the Load Preset icon will not be displayed on the screen.
Save Preset
Enable/disable “save preset” function. When applicable, IT personnel can limit end-user access to
change preset points by locking “save preset” function and switching this function off.
When off, user can’t save preset points via IR remote, Hot key, VISCA, web page and PTZApp 2.
Select Setting > Camera > Save Preset > Off or On.
To Next Page
Loading...
