Using Supplies 3-5
3. Select the supply type you are using:
Supply Used For
Paper Labels and tags
Fax Receipt paper
Synthetic Labels and Tags
4. Tap Feed to advance a label or Calibrate to register the black mark.
Removing Supplies in Peel Mode
To remove supplies in peel mode:
1. Tear the backing paper just above the pinch roller.
2. Open the supply cover completely.
3. Spread the supply holder tabs apart with one hand and remove the supply roll.
4. Carefully pull out the supply backing paper still in place between the pinch and feed rollers.
To Next Page
Loading...
