5-4 Operator’s Handbook
4. Carefully remove any jammed supply and close the deflector.
Note: Do not pull the jammed supply out
through the front of the label
deflector. Do not use sharp objects
to remove jammed supplies.
5. Carefully remove any jammed supply
between the pinch and feed rollers.
6. Clean any adhesive build-up.
7. Reload the supplies and close the label
deflector.
Storing the Printer
Do not store the printer in or near
magnetic fields
wet or damp areas
dirty or dusty areas
areas of intense vibration or shock.
Feed Roller
(behind Pinch Roller)
Pinch Roller
To Next Page
Loading...
