Specifications & Accessories A-1
SPECIFICATIONS & ACCESSORIES
Specifications
Dimensions:
Width – 9.2" (233mm)
Length – 3.5" (89mm)
Height – 10.35" (263mm)
Weight – 2.25 lbs. (1 kg)
Shipping Weight – 5.86 lbs. (2.66 kg)
Printhead:
1.89" (48mm/384 dots) (203 dots per inch)
Printing:
Thermal direct (no ink /ribbon)
Print Speed:
Up to 4" (102 mm) per second
Memory:
64MB RAM and 64MB Flash
Battery Type:
7.4V Lithium-Ion (110V – 240V AC adapter)
3.6V Lithium-Ion (internal)
Battery Recharge
Time:
1 – 3 hours, depending on the charger used.
Supply Sizes:
Width 0.50”, 1.2", 1.5", and 2.0" (12.7mm, 30mm, 38mm, and 51mm)
Lengths .55" – 4.0" (14mm –102mm)
Peel mode supports .785" (20 mm) or greater lengths.
Non-Peel mode supports .55" (13.97mm) or greater lengths.
Operating
Temperature:
40°F – 110°F (4°C – 43°C)
Humidity (Operating
& Storage):
5% – 90% non-condensing
A
To Next Page
Loading...
