6-2 Operator’s Handbook
Checking the Software Version
To check the Software version of the printer, the Ultra Class library, the scanner configuration,
printer diagnostics, and the Application version:
1. Tap the printer icon from Status Bar on the display.
2. Tap About.
Printing a Test Label
To print a Test Label:
1. Tap the printer icon from Status Bar on the display.
2. Tap Printer Diagnostics.
3. Tap Printer from the Printer Diagnostics menu.
4. Tap Diagnostic Labels from the Printer Tests menu.
5. Tap Diag Label from the Diagnostic Labels menu.
The following labels print:
The first diagnostic (test) label shows the model number, software version, and the printer’s
configuration by packet. Refer to the Programmer’s Manual for more information about configuration
packets. The second diagnostic (test) label shows the model number, software version, total number of
inches printed, voltage, print contrast, printhead resistance, number of bad dots, and memory.
To Next Page
Loading...
