Chapter 4: Installing and Configuring DADman Software 9
Chapter 4: Installing and Configuring
DADman Software
Register Pro Tools | MTRX and Activate your Avid Master
Account
Your Pro Tools | MTRX includes an activation card with a code that lets you register the unit, and access
software, firmware, and documentation downloads.
To register your Pro Tools | MTRX and access related downloads through your Avid Master Account:
1 Locate the Activation Card with the code that came with your Pro Tools | MTRX.
2 Visit www.avid.com/redemption and log into your Avid Master Account (if you don’t already have an
Avid account, click “Create Your Account”).
3 Follow the on-screen instructions.
Installing DADman Software
MTRX is controlled over a network connection by DADman software on your computer. Your computer
and all MTRX units must be connected on the same subnet.
To install DADman Software:
1 Download the DADman Software installer for your operating system (macOS or Windows) from your
Avid Master Account.
2 Once the download is complete, launch the installer and follow the on-screen instructions to complete
the installation.
3 If desired, create a shortcut for DADman on the Desktop, or in the Dock (Mac) or in the Start menu
(Windows).
4 Launch DADman.
5 Choose Settings > Device List.
To Next Page
Loading...
