Appendix B: Installing MTRX Expansion Cards 31
Installing an Expansion Card
Installation steps differ slightly depending on the type of expansion card you are installing. If you are
installing any of the following analog or digital I/O cards, or a processor card, see “Installing Expansion
Cards” on page 31:
• MTRX 8 Line Pristine AD card
• MTRX 2 Mic/Line Pristine AD card
• MTRX 8 Mic/Line Pristine AD card
• MTRX Pristine 8 DA card
• MTRX 8 AES3 I/O card
• MTRX Dante 128 card
• MTRX Dual SDI/HD/3G card
• MTRX Dual MADI I/O card
• MTRX DigiLink card
• MTRX SPQ Speaker Processor card
Installing Expansion Cards
Expansion cards are installed into slots along the back of the unit. All eight slots can be used. Up to six an-
alog cards can be installed. Digital I/O, DigiLink, and SPQ expansion cards can be installed in any avail-
able slot.
Orientation, connector and ports of an example Expansion Card (MTRX 8 Pristine DA card shown)
To Next Page
Loading...
