Appendix B: Installing MTRX Expansion Cards 29
Appendix B: Installing MTRX Expansion
Cards
The analog and digital I/O capacity, and processing of Pro Tools | MTRX can be expanded in the following
ways:
Analog I/O
You can install up to six A/D or D/A cards in any combination, for up to 48 analog audio
channels.
Digital I/O
You can install up to eight digital I/O expansion cards for additional AES3, 128-channel IP Au-
dio Dante, MADI, and SDI input and output. You can also install an optional 64-channel IP Audio Dante
mini-module and/or an optional Dual MADI mini-module.
DigiLink
You can install up to eight DigiLink expansion cards for up to 576 channels of I/O between
Pro Tools and MTRX (including the built-in DigiLink ports). Each DigiLink card provides up to an addi-
tional 64 channels of DigiLink I/O.
DSP/FPGA
You can install a SPQ Speaker Processor card for monitor control, speaker matching, and com-
prehensive EQ and bass management in all output formats.
Overview of Installation
Installing expansion cards involves the following steps:
1 Preparing for the installation
2 Removing the top panel
3 Installing and connecting the expansion card
4 Completing the installation
To Next Page
Loading...
