Pro Tools | MTRX Installation Guide12
Updating Pro Tools | MTRX Firmware
To update your Pro Tools | MTRX firmware:
1 Visit avid.com and log in to your Avid Master Account.
2 Download the latest MTRX firmware from the My Products page of your Avid Master Account.
3 Launch DADman and choose Settings > Device List (make sure your MTRX unit is connected and
ready).
4 Right-click on the MTRX unit in the Device List that you want to upgrade.
5 Choose Firmware Update.
6 In the resulting dialog, click File.
7 Navigate to and select the MTRX firmware file that you downloaded from your Avid Master Account.
8 When prompted, confirm that you want to update the firmware for the MTRX unit.
9 A progress dialog appears. The update process takes a few minutes.
10 Once the firmware update is complete, you are prompted to restart the unit.
Save and back up your MTRX Configuration files (.dms) and Monitor Profile files (.dmprof) before
updating MTRX firmware. For more information, see the Pro Tools | MTRX Operation Guide.
MTRX with firmware 2.1 or higher can be upgraded directly to the most recent firmware version.
However, MTRX with firmware version 2.0 or lower must first be upgraded to 2.1, rebooted, and then
be upgraded to the latest firmware. Alternatively, you can update from version 2.0 (or earlier) to the
latest firmware, reboot, and then update to the latest firmware a second time. This works just as well
as upgrading to 2.1 first, and requires only the latest firmware file.
To Next Page
Loading...
