Installation and Setup 10
To uninstall items:
1 Launch the installer. Items that are currently installed are selected (checked) and indicated as Installed.
2 Do the following:
• To uninstall a specific component, make sure it is not selected (no check mark).
• To uninstall all EUCON applications, select
Uninstall all applications.
• To uninstall all User Preferences, select
Uninstall User Preferences (your appsets will not be removed).
3 Click Continue (Mac) or Next (Windows).
AutoLaunch Settings
You can enable or disable auto-launch for EuControl, WSControl, and/or XMON using the new AutoLaunch selector.
To configure AutoLaunch:
1 Make sure EuControl or WSControl is installed, then do the following:
Mac
Click on the EuControl or WSControl icon in the menu bar.
Windows
Right-click on the EuControl or WSControl icon in the System Tray at the bottom of the screen.
2 From the Auto-launch Apps sub-menu, choose any of the following (you can enable more than one):
•
EuControl (for S1, S3, Dock, Control, and Artist Series)
•
WSControl (for S4 and S6)
•MTRX
•XMON
3 Proceed to Create Your Surface in EuControl Settings
EuControl Auto-launch Apps selector (Mac shown)
To Next Page
Loading...
Need help?
General
