Installation and Setup 9
Installing EuControl Software
Next, install the latest version of EuControl software onto your workstation computer. An Internet connection is required to down-
load EuControl.
Activate!
If you have not already done so, follow the instructions on the included Avid S1 Activation card to ac-
tivate S1. Doing so makes EuControl software, documentation, and other software available in your
Avid account.
Install Software
To install EuControl software:
1 Visit www.avid.com/account and log into your Avid account (or create an account if you don’t al-
ready have one) to download the
EUCON_WorkstationUnifiedInstall installer for your workstation
computer’s platform (Mac or Windows). If you do not see EuControl software in your account go
to
avid.com/redemption and click on EuControl.
2 When download is complete, locate the EUCON_WorkstationUnifiedInstall on your computer and double-click it to mount it
(DMG on Mac) or uncompress it (ZIP for Windows), then launch the installer.
3 Follow the on-screen prompts until the Installer list is displayed (as shown below). For a description of each option, select it
(Mac) or hover the mouse over it (Windows only).
4 Select each option you want to install:
• To only install EuControl, select
S1/S3/Dock/Control/Artist Series.
• If you have already installed EuControl on your primary workstation and
now want to install onto an additional, external workstation, select
EU-
CON Workstation
. (See also Connecting a Second Workstation).
5 Click Continue (Mac) or Next (Windows), then click Install.
When reminded that a restart is required, click Continue Installation (Mac)
or
Yes (Windows).
6 When installation is complete click Restart.
After your computer restarts, EuControl software launches automatically
and is running when its icon (which is unlit until the Control app is con-
nected) appears in the Menu bar (Mac) or the System tray (Windows).
7 If the lit EuControl icon does not appear, do any of the following:
•See
3– Add to add S1 manually.
• Click the unlit EuControl icon and choose
Restart EUCON Applications.
• Shut down S1 and your computer, then turn them on (S1 first, then the workstation computer).
•See
www.avid.com/S1 Support for the most current troubleshooting information.
8 Proceed to Updating S1 Firmware.
On 10.14/”Mojave” (only) you might need to add Pro Tools and EuControl to the Privacy list in System Settings.
Unlit EuControl icons on Mac (left) and Windows (right)
Installing EUCON Workstation software
To Next Page
Loading...
Need help?
General
