600-00081-000 Rev 07
-21- FlightMax
Entegra PFD
The Entegra PFD is fully integrated with the S-Tec System 55X and
System 55SR autopilots. The Heading, Altitude and VSI (55X only)
reference bugs are provided on the Entegra PFD to aid in pilot
situational awareness and autopilot control.
When an active autopilot mode is selected, full guidance is provided
from the Entegra PFD to the autopilot, including smooth transitions
to altitude and heading captures. If an active autopilot mode is not
selected (i.e. hand-flying), the Entegra PFD does not provide
guidance other than to display the position of the appropriate bugs
as set by the pilot.
The reference bugs status will indicate when Entegra is coupled
with the autopilot. A solid magenta Heading, Altitude, or VSI
(55X only) bug indicates that the function is currently coupled to an
active mode of the autopilot. A hollow magenta bug indicates that
the function is not currently coupled to the autopilot in an active
mode. In other words, a hollow bug indicates manual or
hand-flying status.
The following is a description of the six autopilot modes supported by
the Entegra PFD. The autopilot may only be coupled to the navigator
selected as the PFD Nav source. The autopilot may not be coupled to
the navigator selected as the PFD Bearing source.
Autopilot Use and Control Users Guide
To Next Page
Loading...
