1. To aim the camera, loosen the adjustment screws on the camera mount arm.
2. Rotate and move the camera and mount arm as required. Review the camera’s live video stream to
help aim the camera correctly.
3. In outdoor installations, the sun shroud should be set as far forward as possible without intruding on the
video image. Slide the sun shroud forward or back to protect the camera against glare from the sun.
4. Tighten the adjustment screws on the mount arm to secure the camera’s position.
5. In the camera web browser interface or the Avigilon Control Center software adjust the camera’s
Image and Display settings. You can set the zoom position, focus and change the image rotation.
Zooming and Focusing the Camera
l In the camera web browser interface or the Avigilon Control Center software, use the camera’s Image
and Display settings to zoom and focus the camera.
a. Use the zoom buttons to zoom the camera in or out.
b. Click Auto Focus to focus the lens.
c. Use the focus near and far buttons to manually adjust the focus.
(Optional) Configuring SD Card Storage
To use the camera's SD card storage feature, you must insert an SD card into the card slot.
It is recommended that the SD card have a capacity of 8GB or more and a write speed of class 10 or better.
If the SD card does not meet the recommended capacity or write speed, the recording performance may
suffer and result in the loss of frames or footage.
1. Insert an SD card into the camera.
CAUTION — Do not force the SD card into the camera or you may damage the card and the
camera. The SD card can only be inserted in one direction.
2. Access the camera’s web interface to enable the onboard storage feature. For more information, see
the Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide.
Zooming and Focusing the Camera 13
To Next Page
Loading...
