Reference: Configuration options
119
Reporting
This group allows for the content of the report file to be determined.
Off
If this option is enabled, the Backup component does not create a log. Only turn off the
logging function in exceptional cases.
Default
If this option is enabled, the Backup component records important information (on
saving, virus detections, alerts and errors) in the report file, and less important
information is ignored for improved clarity. This option is enabled as the default setting.
Advanced
If this option is enabled, the Backup component includes less important information in
the report file.
Complete
If this option is enabled, the Backup component includes all information on the backup
process and virus scan in the report file.
13.7 Update
In the Update section you can configure the automatic receiving of updates. You can
specify various update intervals and activate or deactivate automatic updating.
Automatic update
Activate
If this option is enabled, automatic updates are performed for the enabled events at the
interval specified.
Automatic update every n days / hours / minutes
In this box you can specify the interval at which the automatic update is carried out. To
change the update interval, highlight one of the time options in the box and change it
using the arrow key to the right of the input box.
Start job while connecting to the Internet (dial-up)
If this option is enabled, in addition to the specified update interval, the update job is
carried out every time an Internet connection is established.
Repeat job if the time has already expired
If this option is enabled, past update jobs are carried out that could not be carried out at
the time specified, for example because the computer was switched off.
13.7.1 Product update
Under Product update, configure how product updates or the notification of available
product updates are handled.
Product updates
Download and automatically install product updates
To Next Page
Loading...