Overview of Premium Security Suite
39
– Daily
– Weekly
– Interval
– Single
– Login
– Plug&Play
A backup is always created for the Plug&Play event if the removable disk selected
as the save location of the backup profile is connected to the computer. The
backup event Plug&Play requires a USB stick to be entered as a save location.
Where appropriate, specify a date according to the selection.
Where appropriate, select the following additional options (availability depends on
job type):
– Repeat job if the time has already expired
Past jobs are carried out that could not be carried out at the required time, for
example because the computer was switched off.
Click Next.
The dialog box Select display mode appears.
Select the display mode of the job window:
– Minimize: progress bar only
– Maximize: entire backup window
– Hide: no backup window
Click Finish.
Your newly created order appears as activated (check mark) on the homepage of
the section Administration :: Scheduler.
Where appropriate, deactivate jobs which are not to be carried out.
Use the following icons to further define your jobs:
View properties of a job
Edit job
Delete job
Start job
Stop job
To Next Page
Loading...