Avision AM7640i - Page 95

82
Service Settings: presets the settings and defaults for each function features.
Service Settings
Item
Description
Copy Service Settings
Presets the default settings for Copy.
Scan Service Settings
Presets the default settings for Scan.
E-mail Service Settings
Presets default settings for E-mail.
Address Book
Presets address book.
ID Card Copy Service
Settings
Presets default settings for ID Card Copy.
Network Settings: presets the settings and defaults for network features.
Network Settings
Item
Description
Enable
Enables or disables the product’s Ethernet or
Wi-Fi function.
Choice: Off, Ethernet, Wi-Fi
Wi-Fi: Available for Wi-Fi Station Mode.
[Station] mode: In Station mode, this product
acts as a client that connects to a Wi-Fi Access
Point (usually a Wi-Fi enabled router).
Note: Ethernet mode and Wi-Fi mode can not
be working at the same time.
Host Name
Sets up a host name for the product.
TCP / IP Settings
Sets the connection methods and parameters
of the product’s network.
DHCP：
Enables or disables the DHCP.
You don’t need to specify the Static IP if you
enable DHCP.
IP Address/ Subnet Mask/ Gateway:
if you disables DHCP, set up IP Address,
Subnet Mask, and Gateway for your Static IP.
DNS Server:
Sets up a DNS server address for the product.