Need help?Do you have a question about the AVL DITEST COUNTER and is the answer not in the manual?
General| Brand | AVL DITEST |
|---|---|
| Model | COUNTER |
| Category | Measuring Instruments |
| Language | English |
Details the intended purpose and application of the AVL DITEST Counter.
Specifies the intended users and their required qualifications for operating the device.
Emphasizes the need for expert validation of measurement results due to boundary conditions.
Explains the meaning of warning symbols and provides general safety instructions.
Outlines essential safety guidelines for operating and handling the device.
Details specific safety warnings related to hazardous substances, heat, rotating parts, and electrical voltage.
Illustrates and labels the components on the front panel of the device.
Illustrates and labels the components on the rear panel of the device.
Covers the hardware aspects of the device setup and installation.
Specifies the requirements and conditions for the device's installation location.
Details the connection procedure for the USB cable and power supply.
Guides the connection of the exhaust gas probe and heating hose.
Explains the software installation and update process for AVL DITEST DSS.
Describes the operation of the device when controlled by AVL DITEST DSS software.
Details the steps for establishing a connection between the counter and the DSS.
Covers operating the AVL DITEST Counter without external software control.
Explains the various symbols displayed on the device's LC display.
Outlines the necessary self-tests to ensure accurate measurement results.
Provides step-by-step instructions for performing a self-test on the device.
Guides the user through the official measurement procedure for APK testing.
Describes the general operating procedure for performing measurements in stand-alone mode.
Explains how to access and manage the device's logbook entries.
Details how to change the language settings on the device.
Guides the user through configuring various device settings.
Shows how to display information about the device's system and firmware.
Outlines the criteria and procedure for performing regular visual checks on the device.
Presents a schedule for various maintenance tasks and their frequencies.
Provides instructions on how to clean the device safely and effectively.
Advises on checking the condition of the USB cable for damage or kinks.
Details how to inspect and clean exhaust gas probes for damage or clogging.
Describes how to inspect external components for damage and soiling.
Explains how to visually check and replace the device's filters.
States the requirement for annual calibration and its documentation.
Outlines the warranty terms and conditions for new devices.
Instructs users on how to proceed in case of device damage.
Lists common error codes, their symptoms, possible causes, and solutions.
Provides guidance on reporting problems and finding service contact information.
Advises on the proper disposal methods for electronic waste.
States that the device complies with required standards and how to request documentation.
To Next Page
