Warning and Safety Notes
This user manual contains important warning and safety notices that must be
observed by the user.
The product is intended only for the highly specific use described in the user
manual. The most important prerequisites and safety measures for the use and
operation of the product are also described to ensure faultless operation.
No warranty can be given and no liability is assumed for applications beyond the
described use, irrespective of observance of the necessary prerequisites and
safety measures.
The product may only be used and operated by personnel who, based on their
qualifications, are capable of adhering to the necessary safety measures during
use and operation. Only accessories and consumables supplied by AVL DiTEST
or approved by AVL DiTEST may be used. The measurement results obtained
from the product in question depend not only on correct functioning of the product,
but also on a series of general conditions. The results delivered by the product
must therefore be evaluated by a specialist (e.g. plausibility check) before further
measures are taken on the basis of a delivered measurement.
Settings and maintenance work on open devices while still live may only be
performed by trained specialists who are aware of the associated danger.
The product may only be repaired in the factory of origin or by specialists
specifically trained to perform such repair.
When using the product, it must be ensured by a specialist that the test object or
test system is not brought into any operational state that could result in damage to
goods or endangerment of people.
To Next Page
Loading...
Need help?
General
