AVM FRITZ!WLAN USB Stick Installation, Configuration And Operation

Establishing a WLAN Connection (Windows XP from Service Pack 2)
27
Available wireless networks (example of display)
2. Select the desired WLAN access point and click the
“Connect” button.
The “Wireless Network Connection” window is
opened.
3. Enter the WLAN key of the WLAN access point in the
“Network key” field.
On the AVM FRITZ!Box family products the network
key is printed on the underside of the device.
4. Repeat your entry in the “Confirm network key” field
and then click the “Connect” button.
Entering the network key
The WLAN connection is established.
Should difficulties arise in establishing a WLAN connec-
tion, see the sections “WLAN Connection Is Not Estab-
lished” from page 36 and “Errors During Installation” from
page 33.
For information on AVM Stick & Surf, see the section “AVM
Stick & Surf Technology” on page 11.
To display all important status information for your WLAN
connection, click the FRITZ!WLAN Mini program icon in the
notification area of the task bar.

AVM FRITZ!WLAN USB Stick Specifications

General

Wi-Fi	Yes
Wi-Fi band	Single-band (2.4 GHz)
Data link protocols	IEEE 802.11b, IEEE 802.11g, IEEE 802.11g++
Security algorithms	WPA, WPA2
Maximum data transfer rate	125 Mbit/s
Dimensions (WxDxH)	132 x 138 x 35 mm
Compliance industry standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11i
Supported data transfer rates	11 Mbit/s, 54 Mbit/s, 125 Mbit/s
Compatible operating systems	Windows Vista x64 Edition, Windows Vista, XP Professional x64 Edition, Windows XP/2000
Connectivity technology	Wireless
Component for	PC/Laptop

Weight and Dimensions

Weight	125 g