3-Feb-2015
3.2 Zynq-7000 AP SoC Bank Voltages
The I/O bank voltage assignments are shown in the table below.
Table 19 – Zynq Bank Voltage Assignments
PL I/O Banks 34, 35, and 13 are powered from the end user carrier card. These bank supplies
are designed to be independent on the PicoZed 7010/7020. Maximum flexibility is allowed to the
designer for these banks as the voltage level and standards are left to the end user carrier card
design. The designer of the end user carrier card VCCO supplies is provided the choice of
whether the IO banks use a shared voltage supply or independent voltage supplies.
To Next Page
Loading...
