Need help?Do you have a question about the Avnet Qseven MSC Q7-BT and is the answer not in the manual?
General| Form Factor | Qseven |
|---|---|
| Processor | Intel Atom E3800 Series |
| Graphics | Intel HD Graphics |
| Ethernet | 10/100/1000 Mbps |
| Operating Temperature | -40°C to +85°C |
| Storage | SATA |
| USB | USB 2.0, USB 3.0 |
| Display Interface | HDMI |
Provides copyright information and rights reserved for the document.
States documentation is for qualified audiences only.
Disclaims warranty for correctness and suitability of the document's information.
Rules for installation to prevent radio interference.
States all product names are property of their respective owners.
States MSC Technologies GmbH is ISO 9001 certified.
Describes product development and maintenance for long-term availability.
Provides contact details and resources for technical support.
BIOS SETUP data is stored in non-volatile flash memory.
Usage considerations for on-module SSDs, lifetime affected by cycles.
Usage considerations for on-module eMMC, lifetime affected by cycles.
Details interrupt routing for various devices.
Information on Interrupt Request (IRQ) lines.
Introduces the AMI Aptio Setup screen and its functions.
Describes the Aptio Startup screen interface and behavior.
Explains how to access setup and boot menu.
Explains how to modify Aptio settings and control features.
Instructions to launch Aptio Setup utility.
Explains the structure of the BIOS menu.
Lists menu items and their descriptions.
Describes legend keys and their functions for navigation.
Lists selections available on the Main Menu.
Displays board-specific information.
Shows hardware sensors monitoring.
Settings for BIOS updates.
Lists submenus for advanced BIOS settings.
Settings for TPM 1.2 features.
Settings for TPM 2.0 features.
Settings for ACPI states like hibernation and suspend.
Configuration for serial port console redirection.
Detailed settings for console redirection.
Settings related to CPU features and performance.
Settings for Processor Power Management.
Configuration for IDE/SATA devices.
Configuration for internal devices like eMMC and SDIO.
Settings for integrated graphics output.
Configuration for UEFI network boot.
Configuration for Compatibility Support Module.
Information about NVMe devices.
Configuration for SDIO interface.
Configuration for USB ports and features.
Settings for system security features.
Configuration for SuperIO devices.
Configuration for embedded controller hardware monitoring.
Module-specific initialization settings.
Settings for the I210 Gigabit network controller.
Procedure for BIOS updates via setup menu.
Procedure for BIOS updates from EFI Shell.
Procedure for BIOS updates from Linux.
Procedure for BIOS updates from Windows.
Restoring BIOS defaults without display.
Method to restore BIOS if update fails.
BIOS recovery for older versions.
Jumper locations for CMOS clear and BIOS recovery.
Information on Post Codes.
Explains EIST for processor performance and power management.
Explains Intel Turbo Boost for increased processor frequency.
Explains ASPM for managing PCI Express link power.
Information on Trusted Execution Technology.
Explains virtualization technologies for manageability and security.
Explains Aptio's Fast Boot feature for faster boot times.
Explains TPM for cryptographic key protection and platform authentication.
Explains PXE boot for network booting.
Details SoC, SDRAM, and video capabilities.
Describes HDA link for audio codec connection.
Details 3x PCIe x1 Gen. 2.0 ports.
Details Gigabit Ethernet (Intel® i210).
Details USB 3.0, 2.0, and 1.1 host ports.
Details two SATA Revision 2.0 ports.
Describes LPC interface based on LPC1.1.
Details SPI bus usage for BIOS and customer applications.
Describes the I2C interface connection to the Qseven connector.
States I2C is available for off module devices.
Describes the legacy UART connection.
Describes the SD card interface connection.
Details eMMC chip availability based on BOM variant.
Describes EEPROM usage for module information.
Describes TPM support for security functions.
States SoC integrated RTC is used.
Describes the watchdog functionality.
Details voltage, temperature, and fan speed monitoring.
Lists supported power management states (S3, S4, S5).
Describes fan control for off-module fan connector.
Mentions AMI Aptio 5 with TPM support and SPI-Flash boot.
Lists supported SuperIO chips.
Describes Embedded Application Programming Interface support.
Explains the heatspreader concept and thermal interface.
Defines thermal parameters like Ths and Tpcb.
Describes mechanisms for regulating over-temperature conditions.
Details power management mechanisms like C-states and speed stepping.
Defines run-time parameters and their effect on lifetime.
CPU shutdown on reaching critical temperature.
CPU adjusts clock speed to regulate temperature.
Describes fan control mechanism via BIOS.
C-states used by OS for power saving when CPU is idle.
Speed stepping for optimum power consumption.
Advice for real-time applications regarding power settings.
Describes HDA link for audio codec connection.
Details 1Gb Ethernet MDI signals for the i210 controller.
Details the two SATA ports supported by the Bay Trail-I SoC.
Details the four PCIe lanes supported by the Bay Trail-I SoC.
Details USB 3.0, 2.0, and 1.1 support and port configurations.
Details LVDS channel A signals shared with eDP, and supported panels.
Describes eDP signals shared with LVDS channel A.
Explains DP++ interface for detecting display types.
Details the SPI bus signals and their functions.
How to boot from off-module BIOS.
Usage of customer SPI-Bus.
Details the LPC bus signals.
Details the SDIO interface and UHS-I mode.
Details the UART signals.
Details the I²C signals.
States I2C is available for off module devices.
Describes the watchdog functionality.
Describes fan signals for control and monitoring.
Details signals for system management like power buttons.
Details SM Bus signals and on-module addresses.
BIOS SETUP data retention.
Usage considerations for on-module SSDs.
Usage considerations for on-module eMMC.
Details interrupt routing for various devices.
Information on Interrupt Request (IRQ) lines.
Lists IRQ lines and their typical interrupt sources.
Lists IRQ lines in APIC mode and connected pins.
Introduces the AMI Aptio Setup screen and its functions.
Describes the Aptio Startup screen interface and behavior.
Explains how to access setup and boot menu.
Explains how to modify Aptio settings and control features.
Instructions to launch Aptio Setup utility.
Explains the structure of the BIOS menu.
Lists menu items and their descriptions.
Describes legend keys and their functions for navigation.
Lists selections available on the Main Menu.
Displays board-specific information.
Shows hardware sensors monitoring.
Settings for BIOS updates.
Lists submenus for advanced BIOS settings.
Settings for TPM 1.2 features.
Settings for TPM 2.0 features.
Settings for ACPI states like hibernation and suspend.
Configuration for serial port console redirection.
Detailed settings for console redirection.
Settings related to CPU features and performance.
Settings for Processor Power Management.
Configuration for IDE/SATA devices.
Configuration for internal devices like eMMC and SDIO.
Settings for integrated graphics output.
Configuration for UEFI network boot.
Configuration for Compatibility Support Module.
Information about NVMe devices.
Configuration for SDIO interface.
Configuration for USB ports and features.
Settings for system security features.
Configuration for SuperIO devices.
Configuration for embedded controller hardware monitoring.
Module-specific initialization settings.
Settings for the I210 Gigabit network controller.
Settings for eDP color depth and LVDS panel types.
Settings for backlight enable, polarity, PWM, and brightness.
Configuration for Intel IGD and DDR Double Refresh Rate.
Settings for integrated graphics device and display output.
Configuration for LPC, SMI lock, and BIOS protection.
Settings for HD Audio controller and codecs.
Configuration for XHCI and EHCI USB controllers.
Settings for PCIe dynamic clock gating and ASPM.
Configuration and activation of Secure Boot.
Procedures for managing Secure Boot keys.
Options for saving changes, discarding, restoring defaults, and boot override.
Procedure for BIOS updates via setup menu.
Procedure for BIOS updates from EFI Shell.
Procedure for BIOS updates from Linux.
Procedure for BIOS updates from Windows.
Restoring BIOS defaults without display.
Method to restore BIOS if update fails.
BIOS recovery for older versions.
Jumper locations for CMOS clear and BIOS recovery.
Information on Post Codes.
Explains EIST for processor performance and power management.
Explains Intel Turbo Boost for increased processor frequency.
Explains ASPM for managing PCI Express link power.
Information on Trusted Execution Technology.
Explains virtualization technologies for manageability and security.
Explains Aptio's Fast Boot feature for faster boot times.
Explains TPM for cryptographic key protection and platform authentication.
Explains PXE boot for network booting.
Addresses USB 3.0 stick boot issues and solutions.
Explains handling USB sticks recognized as floppies.
Notes functional requirement for SATA 6Gb/s cable.
Explains startup power cycle when RTC is not used.
Addresses potential issues with USB Gadget driver in xHCI mode.
Guides to check LPSS/SCC Device Mode configuration.
To Next Page
