Avnet Qseven MSC Q7-BT - AMI Graphic Output Policy; Network Stack Configuration

MSC Q7-BT MSC_Q7-BT_User_Manual.pdf 66 / 113
Feature
Options
Description
for drivers)
1.8V Support for SDcard
Enabled
Disabled
Disable/Enable 1.8V Capability in SD Card controller
Note: Windows 7 needs a Hotfix for SD usage (see MSC Website
for drivers)
DDR50 Support for SDCard
Enabled
Disabled
Disable/Enable DDR50 Capability in SD Card controller
PCU UART
Enabled
Disabled
PCU UART Support Enable\Disable
7.8.10 AMI Graphic Output Policy
Table 7-17 BIOS AMI Graphic Output Policy
Feature
Options
Description
Output Select
LVDS
DDI1
EDP
DP1
Output Interface
BIST Enable
Enabled
Disabled
Starts or stops the BIST on the integrated display panel (Built in self
test)
7.8.11 Network Stack Configuration
Note: Network Stack Configuration is only used for UEFI PXE Boot, for legacy PXE boot see chapter CSM Configuration
Feature
Options
Description
Network Stack
Enabled, Disabled
Enable/Disable UEFI Network Stack