Avnet Qseven MSC Q7-BT - NVMe

MSC Q7-BT MSC_Q7-BT_User_Manual.pdf 68 / 113
Feature
Options
Description
Network
Do not launch
UEFI only
Legacy only
Controls the execution of UEFI and Legacy PXE OPROM
Note: for normal PXE boot from internal Lan controller set to
“legacy”.
If an external Lan controller should have an UEFI Oprom, set to
UEFI
Storage
Do not launch
UEFI only
Legacy only
Controls the execution of UEFI and Legacy Storage OPROM
Video
Do not launch
UEFI only
Legacy only
Legacy first
UEFI first
Controls the execution of UEFI and Legacy Video OPROM.
Other PCI device ROM
UEFI Oprom
Legacy Oprom
For PCI devices other than Network, Mass storage or Video defines
which Oprom to launch
7.8.13 NVMe
Table 7-19 BIOS NVMe
Feature
Options
Description
“NVMe Device” (if
connected)
Informative
Informative
Shows informations about initialised NVMe device