Avnet Qseven MSC Q7-BT - ACPI Settings; Serial Port Console Redirection

MSC Q7-BT MSC_Q7-BT_User_Manual.pdf 61 / 113
7.8.3 ACPI Settings
Table 7-11 BIOS ACPI Settings
Feature
Options
Description
Enable S4 Hibernation
Enabled
Disabled
Enables or disables system ability to enter S4 state (Hibernate)).
This option may not effective with some OS.
Enable S3 Suspend
Enabled
Disabled
Enables or Disabled System ability to enter S3 state (Suspend).
This option may be not effective with some OS.
Lock Legacy Resources
Enabled
Disabled
Set to enabled to prevent the OS from reconfiguring the resources
of the SIO device through ACPI.
7.8.4 Serial Port Console Redirection
Table 7-12 BIOS Serial Port Console Redirection
Feature
Options
Description
Com 0-4 Console
Redirection
Enabled
Disabled
Console Redirection Enable or Disable
Console Redirection settings
Com 0-4
Submenu
The settings specify how the host computer and the remote
computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.
Legacy Console Redirection
Submenu
Legacy Console Redirection Settings
Serial Port for Out-of Band
Management/Windows
Emergency Management
Service (EMS)
Console Redirection
Enabled
Disabled
If enabled, the bios will create an SPCR ACPI table, providing
information about the serial port to the Windows Emergency
Management Services (EMS).
Console Redirection Settings
Submenu
The settings specify how the host computer and the remote
computer (which the user is using) will exchange data. Both
computers should have the same or compatible settings.