MSC Q7-BT MSC_Q7-BT_User_Manual.pdf 105 / 113
Issue 5: Powercycle at startup
If no RTC is used, System will perform a extra powercycle at startup because TXE is enabled as default. Disabling this option in Bios setup
will prevent the extra powercycle
Issue 6: Linux / USB Gadget Driver:
We discovered, that the USB Gadget driver may show problems in USB xHCI mode.
Please make sure you use the latest version with actual fixes and check also the MSC Technologies GmbH support download area for latest
information.
Issue 7 : LPSS / SCC Devices
If your LPSS / SCC Device does not work correctly, please check the “LPSS & SCC Device Mode” configuration
(see chapter 7.8.9 Internal Device Configuration).
For additional help please contact MSC Technical Support:
Phone: +49 - 8165 906 - 200
Fax: +49 - 8165 906 - 201
Email: support@msc-technologies.eu
To Next Page
Loading...
Need help?
General
