Chapter 3: Operations 11
Figure 3.4: No Device Connected
Accessing the Command Line
To access the Command Line on your LongView 1000 extender system, press Ctrl, Alt, Shift and C
together. The Command Line displays.
Equalization tuning
To adjust the video quality of the monitor connected to your extender, you may manually tune the
equalization values that are applied during video compensation.
To edit equalization offset values:
1. Press the default Command Line hotkey sequence to display the Command Line.
2. Type equalization tuning and press Enter. The Equalization Tuning screen will be displayed.
Figure 3.5: Equalization Tuning Screen
3. Select Enable to allow manual adjustment of equalization offset values.
To Next Page
Loading...
